A 10-part learning series on choosing and using the right fire extinguisher, from fire classes and agent types to placement, PASS, inspection and testing, based on NFPA 10, IS 2190 and EN 3.

A one-page Fire & Smoke Systems quick guide to fire protection pipe colour codes, referencing IS 2379, ASME A13.1 and the UAE Fire Code.

NFPA 37 clause 6.5.4 lists additional safety features for fuel supply to engines, but some do not apply when the tank is refilled from a fuel vehicle. This explains which ones and why.

A topcoat can go over intumescent fireproofing, but only one that is part of, or approved for, the tested and listed coating system. Neither the SBC nor NFPA gives blanket permission for…

These three terms are often used as if they meant the same thing, but they do not. This comparison helps fire engineers and architects choose the right classification route before working…

A simplified explanation of how NFPA 400 uses control areas and maximum allowable quantities (MAQs) to limit hazardous materials in a building, and when a higher hazard occupancy is triggered.

A step-by-step walkthrough of the initial acceptance test for emergency and standby generators under NFPA requirements: what is tested, the load steps and durations, and what to record…